Awning 280 X 180
Awning for catamarans, boats 280cm by 180cm
This is a fairly large awning in the production line of the BOTHAUS awnings. Despite its size, it is light enough - 5 kg, and quickly installed. This tent is intended for installation on catamarans TRAVEL and Sea Fisher, as well as on any other large boat, with a width of 160cm to 200cm. Due to its size, it perfectly protects most of the boat from both the hot sun and rain.
The tent itself is made of aluminum pipes and absolutely waterproof PVC fabric. Especially it is indispensable in long voyages, creating a cosiness, comfort and sense of security. In this case, the pipes and rope tent used for drying towels, swimsuits and other things. This tent is aerodynamic, that is, it has almost zero windage, so it can withstand the high speed of the boat and the squall wind. Even with a strong side wind, the TRAVEL catamarans retain course stability. It absolutely does not interfere with the review, rowing and passive fishing - trolling. If you need to collect it - leave the spinning or just increase the height of the cockpit - it's a matter of a few minutes: in the folded state a neat vertical arch in the middle part of the boat is formed. For the passage of above-water obstacles, it can be put on a boat by unscrewing two lambs. In the unfolded state, the awning does not interfere with the gentle morning and evening rays of the sun. By the way, one more positive moment - under the tent of dew does not drop out, which means there is no need to wipe the boat in the morning from moisture.
Awning roof for boat, catamaran
All without exception, who purchased boats with tents, and almost 80% of them, are very satisfied and in solidarity in one - it's impossible to overestimate the value of the tent on the boat. It's like a car without a roof. There is only one minus - it needs to be bought.
"Having BOTHAUS - you live with pleasure".
The company BOATHOUSE produces aerodynamic awnings from the sun and rain of a new modern design - from aluminum pipes and PVC fabric. This original construction of awnings is an in-house development of BOTHAUS. A feature of the BOTHAUS awnings is in their aerodynamic properties. That is, they do not create wind barriers - "do not sail." This is achieved by the fact that the tent itself made of PVC fabric forms an even horizontal plane with almost zero sail, - there is simply no reason to "get caught" by the wind.
Another characteristic feature of awnings BOTHAUS - if the canopy prevents fishing or sunbathing, then it in a minute is formed in the form of a radar arch, as on boats, and remains on the boat in a vertical position, absolutely not interfering with you. Of course, it can also be put on a boat while passing low bridges. To do this, simply unscrew the two lambs on the retaining posts. Almost all boat tents when folded simply fall on the boat, but any recumbent tent takes a place and always hinders.
There is another advantage of the BOTHAUS awnings - they absolutely do not interfere with rowing and review of the surroundings. It should be noted from practice that in any weather the awning perfectly performs its functions, and the boat with it looks much more respectable and respectable. It perfectly protects from the scorching sun, but not from a pleasant morning or evening. Also, the tent protects well from the rain. Of course, if this rain is not accompanied by a strong side wind. In addition, especially in the distant hike, pipes and rope tents are used for drying towels and clothes. But especially protect the tents during the debilitating heat - it's just salvation.
Despite the lightness and large size, all the awnings of the BOTHAUS are running and are capable of withstanding storm winds (tested repeatedly in practice). The fact is that the design uses yacht methods - a system of triangles that perfectly distribute the load. And since the aerodynamic resistance of the tents is minimal, that's the perfect result.
Not only in long trips, but also in fishing, in heat and bad weather, aerodynamic awnings of BOTHAUS greatly improve the comfort of the boat and help in achieving the main task - to get maximum pleasure from fishing, rest and travel. This is the main task and, in fact, the main goal of our company:
"Having any model of BOATHOUSE - you live with pleasure."
1. Construction of aluminum pipes, diameter 20mm, connecting elements on bolts and rivets, and PVC fabric 280cm per 180cm - 1 pc. 2. The base of the awning - 4 pcs. 3. Bolts-lambs - 4 pcs. 4. Side ropes with fasteners - 2 pcs. 5. Stretch ropes with fasteners - 4 pcs. 6. Belt ropes with fasteners and fastening on the board - 2 pcs. 7. Packing case - 1 pc.