Inflatable balloon 42 cm, "nose-nose"

Inflatable balloon 42 cm, "nose-nose"

ИконкаЛодки в 3D
Add to Compare


     Symmetric integral inflatable cylinders, 42 cm in diameter, with excellent hydrodynamic performance, with a "nose-nose" configuration. Cylinders are made of high-strength German PVC fabric, density 750 with additional protection from below and protected editions in the bow and stern of cylinders, which are exactly the same. The small diameter and good hydrodynamics of the cylinders make it possible to build a sufficiently heavy lifting, but at the same time high-speed and easily controlled alloy catamaran for rapids and mountain rivers. It should be borne in mind that due to the configuration of the balloon nose-nose, the course stability is practically absent, which is especially important when passing the thresholds, where you need to quickly change course and have the opportunity to pass obstacles in reverse.

  Inflatable Bottle Bottle 42cm "nose-nose" can be any length - from 3 to 8 meters. The platform, respectively, is from 1 m to 6 m in length. At the same time, the carrying capacity of the catamaran, with a draft of 23 cm, a length of 3 m - 220 kg, on 4-meter cylinders - 370 kg, and further, for each meter of the catamaran - 150 kg (provided that the platform is light enough). A large selection of additional equipment will allow you to build an excellent alloy ship with a high level of safety and excellent speed characteristics.


General Description

     BOATHOUSE inflatable balloons for catamarans, inflatable boats, and kayaks are made from one-piece high-quality PVC fabric made in Germany with a density of 750 and 900. This is a rather complicated and costly method, especially when making large cylinders with a length of 6-8 meters. But thanks to this technology, the cylinder has only one seam, which is located below and is the strongest part, because it has triple fabric (two safety tapes are used - on the top and bottom of the seam). It is almost impossible to break through the balloon in this place (from the bottom of the balloon), taking into account the additional protection of the entire lower part of the cylinders over triple fabric.
     The configuration of the cylinders can be "nose-to-nose" or conventional asymmetric. Nose-nose cylinders can be used to build a catamaran for mountain rivers, where directional stability is not important, and most importantly, good germination on the wave and passability, both front and back. The usual asymmetric form of cylinders is used to build catamarans and trimarans with good directional stability. But the most important thing is that all BOTHAUS cylinders can be considered standard in terms of hydrodynamic indicators - a small angle of attack on water, minimal resistance and excellent germination per wave.
     All cylinders are identical to commercially available models that have different diameters - 32 cm, 38 cm, 42 cm, 45 cm, 50 cm, 55 cm, 60 cm and 65 cm. Thus, 8 types of inflatable balloons in two configurations can be made of any length (from 3 m to 9 m) and with any additional. equipment that will greatly facilitate the task of construction, will create additional amenities and a beautiful appearance.
     Therefore, using BOTHAUS inflatable balloons to build your catamaran or trimaran, you provide your future vessel with excellent technical and operational characteristics, increased safety and reliability. What configuration, what diameter of cylinders and what length is more suitable for you - you will determine this by analyzing the information on our website on a model of a boat with the same diameter of cylinders. If questions arise, our experts will help you make the appropriate calculations.
     Good prices, excellent quality, the correct configuration, and most importantly - excellent hydrodynamic performance - the foundation of any catamaran, will allow you to build a very good boat with excellent speed and driving characteristics.

"Having BOATHOUSE - you live with pleasure."


Inflatable balloon 42 cm, "nose-nose"
Product Code: 42
Brand: Boathouse
Overall dimensions, cm:
Overall dimensions 300-800
Diameter of cylinders, cm:
Diameter of cylinders, cm: 42
Payload, kg:
Payload kg: 240 - 800
The number of pressure compartments, pcs:
The number of pressure compartments, pcs: 1
The weight
Weight of aluminum frame
PVC fabric density:
PVC fabric density: 750
The weight of the platform assembly, kg .:
Weight 3,8 - 10


Write a review
  • This product has a minimum quantity of 2