SOLAR PANEL CHARGE CONTROLLER MT515-10A

SOLAR PANEL CHARGE CONTROLLER MT515-10A

$36,0
Qty:
ИконкаЛодки в 3D
Add to Compare

Description

Solar panel charging controller MT515-10A with IP65 protection

permissible humidity 100% but no condensation

for charging gel, AGM and conventional batteries, including LifePO4 and LTO (40-150Ah) from solar panels power up to 180W 12V

* Advanced MCU Control system plus wide-modulated (PWM) technology
* Designed for solar charging GEL, AGM, WET and conventional batteries
* Built-in controller protects the battery from overcharging
* Can be connected to the battery permanently to keep the battery fully charged using the function
floating charge to extend battery life
* Colorful LED indicator easily displays charging status, battery status and system fault.
* Multiple charge protection against reverse polarity, short circuit, overheating and overvoltage
* Multilayer coating, printed circuit boards and terminals for corrosive environment guarantee high product quality
* IP65 protection level

Controller size: 130 X 102 X 27mm

Suitable battery: 12V only
Battery type: GEL / AGM / WET / CALCIUM
Battery type selection: DIP switch
Maximum input voltage: 25 VDC
Max. Current: 10 amps
Min.Battery Start Charging Voltage: 3V
Soft start charging voltage / current: 3-10 V (+/- 0.2) / up to 4 A
Bulk charging voltage: 10-14V (+/- 0.2)
Absorption charging voltage at 25 degrees:

- Gel battery: 14.1 +/- 0.2V
- AGM battery (default setting: 14.4 +/- 0.2 V
- Battery acid-base type: 14.7 +/- 0.2 V
- Calcium battery: 14.9 +/- 0.2 V

Change from absorption to equalizing or floating charge

- Current drop up to 0.8 +/- 0.1 A
- Or charge timer and timeout: 4 hours

Equalizer Charge Active

- Only for wet and calcium battery
- Battery voltage discharged less than 11.5 +/- 0.2 V

Equalizing charging voltage at 25 degrees: 15.5 V

Charge voltage at 25 degrees: 13.6V

General Description

Solar panel charging controller MT515-10A with IP65 protection

permissible humidity 100% but no condensation

for charging gel, AGM and conventional batteries, including LifePO4 and LTO (40-150Ah) from solar panels power up to 180W 12V

* Advanced MCU Control system plus wide-modulated (PWM) technology
* Designed for solar charging GEL, AGM, WET and conventional batteries
* Built-in controller protects the battery from overcharging
* Can be connected to the battery permanently to keep the battery fully charged using the function
floating charge to extend battery life
* Colorful LED indicator easily displays charging status, battery status and system fault.
* Multiple charge protection against reverse polarity, short circuit, overheating and overvoltage
* Multilayer coating, printed circuit boards and terminals for corrosive environment guarantee high product quality
* IP65 protection level

Controller size: 130 X 102 X 27mm

Suitable battery: 12V only
Battery type: GEL / AGM / WET / CALCIUM
Battery type selection: DIP switch
Maximum input voltage: 25 VDC
Max. Current: 10 amps
Min.Battery Start Charging Voltage: 3V
Soft start charging voltage / current: 3-10 V (+/- 0.2) / up to 4 A
Bulk charging voltage: 10-14V (+/- 0.2)
Absorption charging voltage at 25 degrees:

- Gel battery: 14.1 +/- 0.2V
- AGM battery (default setting: 14.4 +/- 0.2 V
- Battery acid-base type: 14.7 +/- 0.2 V
- Calcium battery: 14.9 +/- 0.2 V

Change from absorption to equalizing or floating charge

- Current drop up to 0.8 +/- 0.1 A
- Or charge timer and timeout: 4 hours

Equalizer Charge Active

- Only for wet and calcium battery
- Battery voltage discharged less than 11.5 +/- 0.2 V

Equalizing charging voltage at 25 degrees: 15.5 V

Charge voltage at 25 degrees: 13.6V

Specification

SOLAR PANEL CHARGE CONTROLLER MT515-10A
Product Code: MT515-10A
Brand:
The weight
Weight of aluminum frame

Reviews


Write a review