Catamaran SUNDECK 870

$3779,0 $3590,1
Qty:
ИконкаЛодки в 3D
Add to Compare

Description

Sundeck 870 is made on a cylinder with a diameter of 65 cm. Its overall length is 8,7 m and its width is 2,5 m. The platform itself is 6,25 x 2,5 m in size. It consists of 20 rigid floorings made of marine laminated plywood 1250 x 63 cm in size. such parameters, its carrying capacity is 2100 kg, and passenger capacity is 20 people.

General Description

   SUNDECK catamarans are rafts with good driving performance and an absolutely even rigid deck. One-piece German PVC hydrodynamic cylinders are the reliable foundation for SUNDECK catamarans. They are divided into several pressurized compartments and are protected from below and from the side by a right beam along the entire length. Due to the special shape of the cylinders, the resistance to movement is minimal. Depending on the model, the cylinders can be 55 cm or 65 cm in diameter.
     Longitudinal aluminum pipes with a diameter of 40 mm are inserted into the PVC fasteners and, when inflating the cylinders, they themselves are clamped securely along the cylinders on both sides. Transverse aluminum pipes of the same diameter are connected to the longitudinal pipes by bolts, on which a hard floor is fastened. Rigid flooring made of marine plywood, 12 mm thick and 2.5 m wide, has a non-slip coating and is interconnected by an aluminum profile.
     Thus, it turns out absolutely rigid and reliable design, which is designed to "live" on the water as needed. If necessary, SUNDECK catamarans are dismantled within an hour and transported. You can also transport them on a trailer - a width of 2.5 m allows you to move on any road. The temperature regime is from - 50 to + 70, and the service life is unlimited.
     At the rear of the SUNDECK catamarans are equipped with a transom for motors up to 20 hp. This power is enough to quickly move even the largest SUNDECK model. And for a quiet and economical movement, 5-6 hp is quite enough. The transom is installed during assembly in the upper or lower position for an engine with a long or short leg. In front of the catamaran there is a folding gangway for going ashore and an open box.
     SUNDECK catamarans can be equipped with an awning, mosquito nets, a tent, chairs, sofas, tables, fishing equipment, a bathing ladder, a shower, a steering console and much, much more. Options are limited only by your imagination and the amount of money. On an area of ​​up to 16 sq.m, you can build a real HOUSEBOAT with a kitchen, sleeping places, sofas, a shower and a latrine, which will be ten times cheaper than non-demountable analogues! And live on the water in comfort at least all summer!


"Having BOATHOUSE - you live with pleasure."

Specification

Catamaran SUNDECK 870
Product Code: 870
Brand: Boathouse
Overall dimensions, cm:
Length, cm 870
Width, cm 250
Width of hard flooring, cm: 250
Used boat width, см 250
Luggage compartment size, cm: -
Number and length of cockpits,cm 1х625
Packing size, cm: 250х50Х70
Diameter of cylinders, cm:
Diameter of cylinders, cm: 65
Draft at full load, cm:
Draft at full load, cm: 37
Payload, kg:
Payload kg: 2100
Passenger capacity, people:
Passenger capacity, people: 20
The number of pressure compartments, pcs:
The number of pressure compartments, pcs: 4
The weight
Weight of boat assembly, kg 244
The weight of the boat without flooring, kg: 113
Weight of flooring, kg: 131
Package weight: (bag with a boat, pump and repair kit), kg 251
PVC fabric density:
PVC fabric density: 900
Max. engine power, hp:
Max. engine power, hp 20
Max. engine power (with reinforced transom), hp:
Max. engine power (with reinforced transom) hp: -
Transom thickness, mm:
Transom thickness, mm: 24
Thickness of the reinforced transom, mm:
Thickness of the reinforced transom, mm: -
Luggage compartment volume, l:
Luggage compartment volume, l: -

Package

1. Inflatable balloons - 2

2. Germotseki - 4

3. Halt beam - 2

4. Protection of the lower part of the cylinders - 2

5. Stabilizer of exchange rate stability - 2

6. Handles for carrying, mooring, towing - 4

7. Bag for cylinders - 1

8. Aluminum frame from pipes with a diameter of 40 mm - 1

9. PVC pipe mounts - 84

10. Hard flooring 12 mm from marine plywood 1250x63 - 20

11. Bag for hard flooring - 5

12. Aluminum profile - 9

13. Fixing bolts with nuts and washers - 84

14. Transom for a motor up to 20 hp - one

15. Chipper for waves on a transom - 1

16. Sticker BOATHOUSE - 2

17. Foot pump - 1

18. Rem. set - 1

19. Package of documents - 1

20. Gangway - 1.

Reviews


Write a review

Related Products